Product Introduction
Intelligent liquid dispenser: A cutting fluid intelligent liquid
dispenser is an intelligent liquid dispensing device suitable for
high-precision machining equipment such as machining centers, CNC
machine tools, and integrated machine tools. The user only needs to
connect the raw liquid and clean water pipes to the device, and set
the required concentration and liquid capacity in the mixing system
to start automatic mixing. The system will mix the raw liquid and
clean water according to the user's set parameters without manual
intervention.
parameters:
1. Equipment size: 950 * 600 * 1580mm;
2. Processing flow rate: 1000 liters/hour;
3. Water tank capacity: 120 liters;
4. Concentration range: 0-50%;
5. Working pressure: 0.2-0.6 MPa;
6. Working voltage: AC220V;
7. Equipment power: 1800W;
8. Operating temperature: 0-50 ℃.
Function
1. Intelligent liquid preparation accurately quantifies the ratio
to ensure stable concentration and reduce waste of raw materials;
2. Intelligent start stop, PLC program control, intelligent liquid
dispensing;
3. Automatic sensing of proportioning liquid level and automatic
start stop, without the need for manual operation;
4. Implement monitoring of the original liquid and water source,
with automatic alarm prompts for liquid shortage;
5. The mobile body is easy to install and can be used by plugging
in the connector;
6. Intelligent data storage, automatically saving the usage of the
original liquid and water for each preparation, making it easy to
trace in the future.
Precautions for use
1. Before using the intelligent cutting fluid dispensing machine,
ensure that the equipment has been correctly installed and
connected to the water source and cutting fluid container.
2. When setting the proportioning parameters, the concentration and
required ratio of the cutting fluid should be accurately input
according to the machining requirements.
3. During the operation of the equipment, the operating status and
liquid level of the equipment should be regularly checked to ensure
its normal operation.
4. Regularly maintain and upkeep the equipment, such as cleaning
the storage tank, replacing filters, etc., to extend the service
life of the equipment.
Operation process
Users only need to connect the original solution pipe and the clean
water pipe when they receive the device, set the required
concentration and liquid capacity in the proportioning system, and
start automatic proportioning. The system will mix the original
solution and clean water according to the parameters set by the
user, without manual intervention.
